ADT Security Services Medical Alarms Universal Zone Coder Instrukcja Użytkownika Pobierz pdf (Strona 8)

51349:D

4/25/00

Figure 3-1: Mounting the ADT-UZC-256 to a CHS-4

Section Three:

Installing the ADT-UZC-256

Unimode II Installation

Mechanical Installation

The ADT-UZC-256 mounts beneath the third and fourth modules, to the right of the CPU. The

ADT-UZC-256 fastens to the base of the CHS-4 chassis using the four hex standoffs

(provided), which are screwed onto four PEM studs. The ADT-UZC-256 is then attached to

three of the four standoffs using the mounting screws provided (see Figure 3 - 1).

Electrical Installation

Connect the main power harness from the MPS power supply to P3 on the ADT-UZC-256.

Connect the short power harness (provided) from P2 on the ADT-UZC-256 to the

CPU-5000. See Section Two for all terminal assignments.

Connect the EIA-485 annunciator signal from the two-terminal connector on the lower CPU

board (TB-2) to the ADT-UZC-256 EIA-485 IN terminals.

For connection of notification appliance power to and from the ADT-UZC-256, refer to the

power configuration illustrations in Section Four.

STEP 1 STEP 2

ADT-UZC-256

ADT-UZC-256 CHS--4

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Brak uwag

ADT Security Services Medical Alarms Universal Zone Coder Instrukcja Użytkownika Strona 8